How To Change Fitbit Inspire Hr Band

Irresolute the band on a Fitbit device may seem like a uncomplicated thing to do, merely it can be all too easy to end up in a fight with your new Versa 2, Accuse, Inspire HR or Ionic.

Customization is i of the existent strengths of Fitbit's devices, so it's likely that you'll desire to bandy out the standard band fairly shortly after buying - or even simply switch betwixt them two for the office and workouts.

For those struggling to exercise so, though, we're here to lend a helping hand. Below, nosotros've got steps on how to change bands for each device, so read on to find out everything you lot need to know.

How to alter band on Fitbit Versa 2

Fitbit'due south latest smartwatch is the top of all its wares, just trying to change the band on any of its Versa models tin be a chip of a trial.

We've chipped plenty of nails trying to force those tiny metallic bars into place, listening for the lock, and unfortunately there'southward no like shooting fish in a barrel way around that procedure.

Related: All-time Fitbit Versa bands

Some bands are easier to switch than others, and all should work across the Versa 2, Versa and Versa Lite.

Also, hot tip: if you're switching betwixt the small and large bands, you only demand to alter the bottom one-half of the ring – save yourself some hassle.

Switch bands on Fitbit Versa 2

1. Turn your Fitbit Versa or Versa 2 onto its front and find the ii metal release levers, located at the edge of each finish of the band and locked into the smartwatch's casing.

2. To release the band, slide the pivot on the lever inwards, and then pull the band away from the watch.

iii. To attach a new wristband, slide the pin into the small notch on the watch. Then, equally you fit it into one end, line information technology up with the other cease and release the pin into place.

4. You should hear the two sides lock into identify, and the band should be stable.

How to change band on Fitbit Charge 3

Changing bands on the Fitbit Charge iii and older Charge 2 is actually very similar, despite the leap made betwixt generations in the design department.

That's because both feature the aforementioned strap mechanism on the actual tracker, and, similar to the Ionic, switching both sides should really be very easy.

Switch bands on the Fitbit Charge three

one. Turn over the tracker onto its front end and find the two latches – one will sit down on either side of the case.

2. To release, printing downwardly on the apartment button on the strap. As with the Ionic, you may accept to movement it around and lock properly before trying to un-snap information technology from the frame.

3. And so to attach a new band, just slide it into the latch until yous hear it snap into place.

Finding solid third-party bands for this tracker isn't necessarily easy, so check out our all-time Fitbit Charge 3 bands to buy.

How to change ring on Fitbit Ionic

The Fitbit Ionic is perhaps the easiest device to customise inside the Fitbit family, with its clip system helping you snap different bands into identify in but a few seconds. It'southward easier than the Versa 2, that's for sure.

Switch bands on the Fitbit Ionic

1. Plow the Fitbit Ionic onto its front and locate the ring latches – there'll be one on each cease for you to unclip.

2. To release, push down on the flat button on the strap on both sides. Sometimes you may have to wriggle it around, perhaps lock properly into the watch, before fully releasing information technology from the example.

3. To attach a new ring, simply line it up with the latch on both sides and printing in until you can hear it snap into place.

Need some help finding more bands to pair with your device? Check out the height Fitbit Ionic bands currently bachelor.

How to change ring on Fitbit Inspire 60 minutes

Irresolute the band on a Fitbit Inspire or Inspire HR is actually very similar to the machinery used on the Versa, with quick-release levers used.

It's not the easiest, and can actually be tough to lock into place, but you'll get the hang of it.

Switch bands on Fitbit Inspire

one. Turn the tracker onto its front and locate the quick-release lever – i volition be on each side of the tracker.

2. If y'all want to release that half of the ring, push button the lever inwards and simultaneously pull the ring abroad from the tracker. Repeat on the other side to terminate up with a band-less tracker.

3. To attach a new strap, line the pin up with the pigsty in the tracker reverse the quick-release lever.

4 . One time information technology's tucked in on 1 side, push the lever in and practise the same in order to slide it into the other.

5. With both sides inserted, permit go of the lever and give the band a quick pull to ensure it'due south all locked into identify – you should hear a snap on the 2nd hole.

How to change ring on Fitbit Alta

Whether you lot're trying to alter the band on a Fitbit Alta Hour or the regular version, the process is just the same.

And since this is Fitbit's sleekest and most fashionable tracker, with enough of designer bands at your disposal, rotating bands is an essential skill for whatsoever possessor.